Lexicon Products Support Press Distribution Company  
Current Product Index > Receiver > RV-5 Receiver > RV-5 Receiver Specifications
Product Info
Specifications
Image Library
Reviews
Awards
Product News
Press Releases
PDF Brochure
Downloads
Registration
RV-5 Receiver
Product Specifications
Performance (Composite & S-video)

 Differential Gain

<0.2%

 Differential Phase

<0.5°

 Gain

±0.15dB

 Signal-to-Noise Ratio

>65dB

 Frequency Response

Composite: 10Hz to 8MHz, -3dB

 Compatibility

NTSC, PAL and SECAM

 A/D Converter

12-bit, 110MHz

 D/A Converter

12-bit, 74.25MHz

 Input Level/Impedance

1V peak-to-peak/75Ω

 Output Level/Impedance

1V peak-to-peak/75Ω
Performance (Component Video)

 Impedance

75Ω

 Bandwidth

>100MHz

 Insertion Loss

<3dB

 Compatibility

3-channel (Y, Pr, Pb), format-independent

 Frequency Response

10Hz to 100MHz, -3dB
Audio Performance

 Digital-to-Analog Conversion

24-bit, 44.1 to 192kHz, multi-bit

 Analog-to-Digital Conversion

24-bit, 96kHz, dual-bit

 Input Sensitivity

400mV for analog 1 to 6, and 400mV for 8-ch input

 Input Inpedance

98.5kΩ for analog 1 to 6, and 32kΩ for 8-ch input
Performance (FM Tuner)

 Tuning Range

87.5MHz to 108MHz

 Selectivity

± 400kHz, 70dB

 Signal-to-Noise Ratio

Mono: 70dB, stereo: 65dB

 Image Rejection

43dB

 Sensitivity

IHF 8 uV/19.2dBF

 IF Rejection

75dB

 Stereo Separation

51dB at 1kHz

 Distortion

Mono: 0.2%, stereo: 0.1%
Performance (AM Tuner)

 Tuning Range

520kHz to 1720kHz

 Sensitivity

Loop 177uV/m

 Selectivity

± 10kHz, 25dB

 Signal-to-Noise Ratio

45dB

 Image Rejection

32dB

 IF Rejection

40dB

 Distortion

1.2%
HDMI Performance

 HDMI Input

Video: 480i/p, 576i/p, 720p or 1080i
Audio: Dolby Digital, DTS and PCM (32, 44.1, 48, 88.2, 96, 176.4 and 192kHz)

 HDMI Output

Video: 480i/p, 576i/p, 720p or 1080i
Audio: Dolby Digital, DTS and PCM (32, 44.1, 48, 88.2, 96, 176.4 and 192kHz)
Inputs

 Analog Video

Three component video, RCA connectors
Four S-Video connectors
Four composite video, RCA connectors

 Digital Audio

Four S/PDIF coaxial (RCA) and four S/PDIF optical (Toslink) connectors. Coaxial and optical input connectors conform to IEC-958, S/PDIF standards
One USB mini-B connector

 Analog Audio

One 8-channel input array, RCA connectors
siz stereo RCA connectors
One microphone, 3.5mm mono mini plug
1 dock 30-pin connector (for optional docking station)
1 FM antenna
1 AM antenna
Input sensitivity = max input level 2Vrms

 Control

One RS-232, 9-pin, D-sub connector
One IR receiver, on front panel
One 3.5mm IR in jack, input voltage: 3V - 15V, input current: 10mA, Frequency: 20Hz - 1kHz. Accepts either stereo plug (tip/ring/sleeve) or mono plug (tip/sleeve)
Outputs

 HDMI (Version 1.1)

One HDMI type A, 19-pin connector

 Analog Video

One component video, RCA connector
One S-Video connector
One composite video, RCA connector

 Analog Audio

7-channel amplified, binding posts
One 8-channel preamplifier plus additional subwoofer, RCA connectors

 Control

Two triggers - one power on/off and one programmable. 3.5mm mono mini plugs, 12VDC, 300mA maximum output draw
General

 Power Requirements

120V, 60Hz, 1300W, IEX detachable power cord (supplied)
230V, 50Hz, 1300W, IEC detachable power cord (supplied for EU and UK)

 Power Consumption

4.82W at power on, idle 1235W at rated power output (7 channels driven)

 Dimensions

Height (with feet): 6.6 inches (168mm)
Height (without feet): 6 inches (153mm)
Width: 17.3 inches (440mm)
Depth: 15.6 inches (397mm) (includes knobs, buttons and terminals)

 Weight

Net weight: 39.7lb (18kg)
Gross weight: 55.1lb (25kg)

 Rack Mounting

Lexicon built rack mount kit not available. Please seek alternative

 Operating Environment

Operating temperature: 0 to 45°C (32 to 113°F)
Storage temperature: -20 to 60°C (-4 to 140°F)
Relative humidity: 93% max without condensation

 Remote Control

Hand-held, back-lit, IR/RF (FR for use with optional RF-1 receiver) pre-programmed and learning remote control (requires 4 AAA batteries - included)
Amplifier Outputs

 Continuous Output Power

85W per channel, 8Ω, all channels driven, 20Hz to 20kHz

 Frequency Response

10Hz to 40kHz, +0, -2dB

 THD + Noise

<0.05%, 20Hz to 20kHz, 1W, <0.07%, 20Hz to 20kHz, 85W

 IM Distortion

<0.04%

 Slew Rate

17V/us (condition: output 40Vpp, 1k sine wave, rising time from 10% to 90%)

 Signal-to-Noise Ratio

95dB typical, 22kHz bandwidth, min 95dBA, 90dBA typical
Preamplifier Outputs

 Frequency Response

10Hz to 40kHz, +0, -2dB

 THD + Noise

<0.05%, 20Hz to 20kHz

 Dynamic Range

100dB typical, 22kHz bandwidth

 Signal-to-Noise Ratio

100dB typical, 22kHz banwidth, min 100dBA, 103dBA typical

 Output Level

200mV typical, 5V maximum