Equipped with an over-sized toroidal transformer and individual power supplies for each of its seven channels, the GX-7 combines considerable output with quiet, low-distortion operation. Because each channel has its own power supply, the GX-7 has significantly improved channel separation. Intended for systems where the additional output of the RX-7 or the ZX-7 is not necessary, the GX-7 - with 125 watts per channel into 8 ohms - has more than enough power to drive most multi-channel speaker systems. When driving a 4 ohm load, the output of the GX-7 increases to an impressive 188 watts per channel.
In order to facilitate easy system integration, the GX-7 includes a 12-volt trigger input on the rear panel so that it can be powered up remotely buy a separate device with an output trigger, such as a Lexicon Digital Controller. A rack mount is also available.
With its clean, quiet power, the GX-7 serves as an exceptional addition to any multi-channel home entertainment system.
|Speaker Connections||7 pairs of heavy-duty, gold-plated binding posts|
|Rated Output Power into 8 ohms||125W RMS per channel into 8 Ohms from 20Hz to 20kHz|
|Rated Output Power into 4 ohms||188W RMS per channel into 4 Ohms from 20Hz to 20kHz|
|Frequency Response||20Hz to 20kHz +0.1dB/-0.5dB; 10Hz to 40kHz +0.1dB/-1.5dB|
|Signal-to-Noise Ratio||Greater than 100dB, ref 125W/8 Ohms (30kHz bandwidth)|
|Total Harmonic Distortion (THD)||Less than 0.05% at full power ratings|
|Crosstalk||Greater than -80dB @ 1kHz (30kHz bandwidth)|
|Damping Factor||Greater than 200 @ 20Hz (ref 8 Ohms)|
|Input Sensitivity||1V for 100W out @ 8 Ohms|
|Input Impedance||Minimum 10KOhms|
|Power Requirements||120V 60Hz 12 Amp (domestic) 230V 50Hz 7 Amp (export)|
|Depth||19.5-inches (including handles) 17.12-inches (not including handles)|
|Weight||51 pounds (23.1 kg)|
|Included Accessories||Optional brackets are available for mounting the amplifier in a standard 19-inch equipment rack|